Power on your gateway and connect to it over Ethernet or Wi-Fi. The 618 will route all traffic to itself as gateway even if you disable dhcp I usually disable wifi and dhcp on the Huawei. The problem here is needing to use the wifi from the Huawei. Cons: Does not unlock any additional features. Does not add any additional layers of NAT. Pros: Makes WiFi available in more parts of your house. Many routers have a mode known as access point mode, which disables router capabilities and makes it only act as an access point and ethernet switch. After you click Save, it is advised that you restart the router to ensure that the settings take effect.Option 1: Use your own router in access point mode. After the settings are saved, you can modify parameters such as the Wi-Fi name and password on the My Wi-Fi page as required. Set the Internet access mode to Bridge (AP) and click Save. Visit …Set the Internet access mode to Bridge (AP) and click Save. Disable the WiFi on the T-Mobile gateway when using your own. But you'd have change ether1 by removing the /ip/dhcp-client on ether1, and adding ether1 to the /interface/bridge/port I grabbed the 7.1.3 output of the /system/default-config from an LtAP at 7.1.3 here: Code: Select all Plug the WAN jack on your router into any of the LAN jacks on your T-Mobile gateway.
You could try the "Home AP" mode, that will get you a Wi-Fi network with a LAN to test the LTE part.
0 kommentar(er)
